swh-motorsport.at
  • Vehicle-specific kit for BMW F8X M2 – M3 – M4 with manual 6-speed gearbox, standard H-pattern.
  • Shifter is technically identical to F2/3X but is supplied with shift rod XS, suitable only for "M"
  • Installation is done without drilling in the center tunnel!
  • Short and super precise gearshifts H-shifted.
  • The clutch system remains original.
  • Racing look.
  • Optimum ergonomics with the Focus Motorsport: Perfect positioning of the gear knob close to the steering wheel. The H-gear shift pattern is within approx. 75 x 75 mm.
  • Reverse gear unlocking via cable pull from the gear lever. It is impossible to accidentally engage reverse gear. Reverse gear is unlocked by pulling up the sliding sleeve on the gear lever.
  • Low weight and high stability: The milled and turned parts are made of 7075 aluminum, the substructures are made of laser-cut, 3/6 mm thick aluminum sheet AlMg3. The parts are joined together using the TIG welding process and brushed to a bright finish for an optimal finish.
  • Smooth gear changes under load or when cornering.
  • Integrated center position spring, therefore perfect feedback when changing gears during upshifting and downshifting.
  • Right/left stops and reverse stop can be adjusted separately.
  • Shifter is delivered as a complete kit with CAE shift rod, including all small parts, fastening material. Shifter is intended for vehicles with interior fittings or a center console, which must be modified for installation.
  • Surface and gear knob available in various designs; and as an accessory covered with grey Alcantara with red or blue X-seam
Total height above ground: approx. 375 mm
Total length overall: approx. 180 mm
Base plate dimensions: approx. 180 x 115 mm
Switching travel: approx. 75 mm
Dial path (transverse direction): approx. 75 mm
Weight (complete): approx. 1.66 kg
Shift knob offset (rear / top): depending on the vehicle type approx. 0 / 100 mm

Scope of delivery:

Shifter completely pre-assembled, sealing plate with rubber bellows; CAE shift rod XS; all small parts and fastening parts.

Suitable for the following vehicles:

  • BMW F87 M2
  • BMW F8x M3 M4

If we do not explicitly mention a parts certificate or a general operating permit (ABE) in the product text, it is a motorsport article that is not approved under the Road Traffic Regulations (StVO) and therefore the operating permit expires if no entry is made in accordance with Section 21 StVO!

Wenn wir im Produkttext nicht ausdrücklich von einem Teilegutachten, einer allgemeinen Betriebserlaubnis (ABE) oder einer ECE schreiben, handelt es sich um einen Motorsportartikel, der in der Straßenverkehrs-Ordnung (StVO) nicht zugelassen ist und somit die Betriebszulassung erlischt, wenn keine Eintragung nach in die Fahrzeugpapiere erfolgt!

Wir weisen außerdem explizit darauf hin, dass keines unserer zum Verkauf angebotenen Produkte, originale Fahrzeugteile der Fahrzeughersteller BMW AG, M GmbH, MINI, VAG oder von sonstigen Fahrzeughersteller sind, außer dies ist ausdrücklich so vermerkt. Das Benennen der Fahrzeug Marken und Modelle dient lediglich der Produktfindung und deren Zuordnung zum passenden Fahrzeugtyp.