SPEED brake cooling suitable for BMW M2 M3 M4 G87/G80/82 TRACK – complete set

This is the track set for ambitious drivers who like to drive their vehicle on the race track. You can also find the Clubsport set as a simpler version with a slightly lower level of efficiency, but even easier and tool-free installation.

For the very ambitious among you: Both cooling systems can be combined!

Air duct inlet:

In order to transport the air to the brake ventilation outlet, a suitable inlet is essential. The G80/82 M3/M4 (as well as the Competition) already has inlet ducts in the front bumper as standard, but these end in the middle of the wheel arch. In order to avoid the air swirling around randomly in the wheel arch, we have developed an inlet duct that can be installed with minimal effort and connects the air to the outlet using a hose around the wheel. No fastening tools are required for installation. It is carried out in exchange for the original duct connector. The duct is based on the OEM duct and therefore uses exactly the same connection points and can therefore be 100% retrofitted without leaving any residue.

Air duct outlet:

For many vehicles, brake cooling is recommended even under moderate loads, even outside of the race track. This not only improves braking performance, but also drastically reduces wear on the friction partners. Our armature plate uses the channeling of the air flow to the center of the brake disc to use the turbine effect to cool the disc from the inside. We specifically flow the air onto the disc at a defined angle to avoid any scattering losses and to use the available air volume as efficiently as possible. The lightweight construction in combination with powdered aluminum means that the armature plate is sufficiently strong and at the same time light and insensitive. In addition, the bearings closest to the brake disc are shielded from the heat to increase their service life (if necessary).

Included in delivery:

• 1x air duct inlet left
• 1x air duct inlet right
• 1x anchor plate left
• 1x anchor plate right
• 2x air hose (2 meters)
• 4x hose clamps

Article is suitable for

• BMW M4 G82
• BMW M3 G80
• BMW M2 G87

Motorsport parts without road approval We explicitly point out that none of our products offered for sale are original vehicle parts from the vehicle manufacturers BMW AG, M GmbH, MINI, VAG or other vehicle manufacturers. The naming of the vehicle brands and models is only for the purpose of finding the product and assigning it to the appropriate vehicle type.

The different models vary slightly in the wheel position, coupled with different chassis geometries and wheel and tire combinations, it is impossible for us to cover all variants. In the worst case, the wheel could rest slightly on the ground when the steering is fully turned (which should only be the case when parking), which cannot cause any damage to the tire. In this case, we would ask you to refrain from making the last ¼ of the steering wheel turns.

Here is the installation video and instructions from SPEED Engineering: https://www.speedengineering.de/wp-content/uploads/1633/98/Video-13221-_-13222-_-13256-Bremsenkuehlung-BMW-G82-Set.mp4