Our PRO-Line has its focus on motorsport. The available designs, the components used and the available functions are all selected and designed with motorsport in mind. The perfect steering wheel setup can be tailored to your needs. This means that you literally have all the necessary controls for the race at your fingertips.
The KMP PRO-Line is available in four different layouts. 4 buttons, 6 buttons, 10 buttons and 8 buttons + 2 rotary encoders with push button. The “KMP Original” buttons are commonly used in aviation and the military. These high-quality buttons have a high actuation force (17N) and a comfortable stroke.
For the BMW G8X we have an extensive list of equipment available. High beam indicators, indicators, traction control, start/stop, CAN bus output and much more. The possibilities are endless. All functions are seamlessly integrated into the factory electronics. Depending on the function, a small amount of wiring is required. All are supplied with suitable plugs and instructions.
For those who prefer a standard solution, we have also created a proposal for a setup that offers a balanced mix of advanced racing controls and everyday driving functions. This layout, as shown below, can be ordered directly from the webshop at a special introductory price.
key function
SW1: Volume –
SW2: Volume +
SW3: Horn
SW4: Turn right
SW5: M1/M2
SW6: Headlight flash 6x / high beam
SW7: Turn left
SW8: Settings / Cruise control
SW9: Speed +1 / Speed +10
SW10: Speed -1 / Speed -10
Certain keys are programmed twice. If a key is pressed for more than one second, the next function is activated [/]
- Advanced race controls
- Shift lights
- Speed limit control
- Button modes
- Allgemeine Hinweise
Racing control at the touch of a button! The main goal is to bring the necessary functions to the steering wheel. Depending on the model, we have an extensive list of available functions. The most common functions are high beam, windshield wipers/washers, indicators, hazard lights, start/stop button and chassis functions such as traction control.
Our unique approach does not replace components such as the steering column arm, but integrates seamlessly into the factory electronics without causing any error codes.
8 RBG LEDs, elegant design with smoked black light tubes in the carbon plate. The light intensity can be controlled via the interior light switch or automatically via the integrated light sensor. The maximum speed and the delta speed can be programmed by KMP. The usual sequence is: 2x green, 2x blue, 2x yellow, 2x red and all LEDs flash red.
With the touch of a button you can automatically set a speed limit of 40, 60 or 120 km/h. It will basically run a sequence to set the desired speed limit, often used in the pit lane or during yellow flags. The function can be started up to a speed of 180 km/h. If a limit function is present, this will be used. If not, the cruising speed will be automatically set.
You can customize a button for multiple functions. Short press (less than 1 second), long press (longer than 1 second). You can also customize a button to act as a momentary, flashing or toggle button. This is often used for turn signals (short press means 3x flashing, long press is permanently active) or for combining similar functions in one place. Depending on the bike model, we also offer rotary encoders. These are often used for volume control or speed control.
If we do not explicitly mention a parts certificate or a general operating permit (ABE) in the product text, it is a motorsport article that is not approved under the Road Traffic Regulations (StVO) and therefore the operating permit expires if no entry is made in accordance with Section 21 StVO!
The following features are available for an additional charge:- Advanced race controls (+€299.00)
- Speed limit function (+179.00 €)
- Shift light (+299.00 €)
- CAN Output (+238.00 €)
Wenn wir im Produkttext nicht ausdrücklich von einem Teilegutachten, einer allgemeinen Betriebserlaubnis (ABE) oder einer ECE schreiben, handelt es sich um einen Motorsportartikel, der in der Straßenverkehrs-Ordnung (StVO) nicht zugelassen ist und somit die Betriebszulassung erlischt, wenn keine Eintragung nach in die Fahrzeugpapiere erfolgt!
Wir weisen außerdem explizit darauf hin, dass keines unserer zum Verkauf angebotenen Produkte, originale Fahrzeugteile der Fahrzeughersteller BMW AG, M GmbH, MINI, VAG oder von sonstigen Fahrzeughersteller sind, außer dies ist ausdrücklich so vermerkt. Das Benennen der Fahrzeug Marken und Modelle dient lediglich der Produktfindung und deren Zuordnung zum passenden Fahrzeugtyp.